Stratification of concrete
In relation to concrete, the term 'stratification' refers to the formation of horizontal, layered lines that can sometimes be found in cured cast-in-place concrete. This is the result of the pouring of successive concrete batches that may differ slightly in appearance.
Stratification generally only occurs in wetter concrete, rather than those that are of medium or drier consistencies. Concrete that is over-wet or over-vibrated can separate into horizontal layers, with the lighter material tending to form towards the top, and heavier material moving towards the bottom. This can have a detrimental effect on the durability of the concrete.
To remedy stratification, the concrete can be re-vibrated, as long as the concrete has not become stiff to the point where plasticity will not be restored after re-vibration.
[edit] Related articles on Designing Buildings
Featured articles
Check out some of the best features and news from Designing Buildings as well as key stories from around the web.
CIAT reflects on the party conferences.
CIOB announce the winners of the Art of Building photography competition.
National Scheme of Delegation introduced.
The cost of employing people remains a concern.
Code of Practice for Electrical Energy Storage Systems.
ECA calls on members to comment on draft 4th edition.
Bringing together expertise and creating cultural benefits.
CIOB celebrates positive Ofsted report.
The Building Safety Regulator announces a call for evidence.
Government approach could undermine delivery and regeneration.
World's first mass timber data centre.
The overlooked environmental aspect of data centre development.
Introduction to radon awareness
New technical information sheet published by CIOB.
Updated supplier guide can help electrical contractors engage with NHP.